Home

About/Contact                 

Line Lock
Bolt Kits

Line Lock

Line Lock
Heated O2 Harness
O2 Extensions

Line Lock

Another LT1 F-Body Line Lock kit you say?  Well, it's only natural considering how long I've been engrained in the F-Body world.  I'm not claiming to be better than the next guy, I'm not claiming that it works better than the next guy.  What I am claiming, rather guaranteeing, is that I will offer the same performance as the next guy for less cost to the end consumer.  

Ok, so I fibbed on one small thing.  Unlike other kits out there, mine requires absolutely ZERO drilling or using self-tapping screws for mounting.  Using a design of my own conception, the solenoid is bracket mounted to the bolts for the master cylinder attachment to the brake booster.  This allows for a less invasive installation and a cleaner look if you ask me.    

So what's in the kit?  How about everything you need for a complete installation. 

• 1 -- Summit Racing Line Lock Solenoid

• 1 -- Black powder coated mounting bracket

• 2 -- Sets of nuts and bolts for mounting of solenoid to bracket

• 1 -- Set of pre bent brake lines with proper factory sized fittings

• 2 -- Adapter fittings for connection to the line lock solenoid

• 1 -- Red LED lit Rocker Switch for positive identification of actuation

• 3 -- Female spade connectors for connection to the switch

• 2 -- Ring Terminals for grounding and battery connection purposes

• 3 -- Crimp and heat connectors for making wiring connection

• 6 -- Inches of heat shrink tubing for covering exposed connections (Ring terminals, spade terminals)

• 1 -- 16ga Fuse holder and 30A fuse

• 20 -- Feet red Primary Wiring

• 5 -- Feet Black Primary Wiring

• 8 -- Feet Convoluted tubing for routing the wiring cleanly in your engine bay

All brake lines are bent and flared by me as accurately as possible.  As with any vehicle, variances can and will exist, and as such there may be a little bit of hand tweaking for the brake lines to line up perfectly.  This is a normal part of the installation process.

As always, I warranty the parts I make for life.  That means if a line ever fails, you get a new one, no questions asked.  I also personally warranty the Summit Solenoids for six months from date of purchase from me.  If it fails I'll send you a new one, all I ask is that you return the old one to me.  

See below for installed examples in my car:

As you can see, this kit differs from others in that there is absolutely NO drilling into the vehicle to mount the solenoid.  Mounting it on a bracket allows for a non-invasive kit that cleanly installs in your car, out of harms way.
Above you can see how the included tubing allows for a very clean install, and I've also got a couple of pics of the activation switch that can conveniently be located out of the way in the cigarette lighter.  Left pic is off, right pic it's on.  It's hard to capture the light with a camera, but believe me, it's bright enough to notice easily.

So what does this cost?  Not $135 plus shipping.  Not $155 plus shipping.  I am offering my kit to the LT1 community at a standard price of $125 SHIPPED to the US.  If you're ready to purchase, simply click the "Pay Now" button below and you're on your way. 

$125 Shipped